Need help?Do you have a question about the Dynacord COBRA and is the answer not in the manual?
General| Nominal impedance | 8 Ohms |
|---|---|
| Rated power capacity RMS | 400 W |
| Program power capacity | 800 W |
| Peak power capacity | 1600 W |
| Frequency range (-10 dB) | 45 Hz - 20 kHz |
| Components Lo | 1 x 15" woofer |
| Connectors | 2 x NL4MPR Speakon |
| Cabinet material | Plywood |
| Finish | Black Structure Paint |
| Frequency Response | 45 Hz - 20 kHz (-10 dB) |
| Sensitivity | 98 dB (1W/1m) |
| Drivers | 1 x 15" woofer, 1 x 10" midrange, 1 x 1.4" compression driver |
| Input Connectors | 2 x Speakon NL4 |
| Output Connectors | 2 x Speakon NL4 |
Details the active 2-way COBRA SYSTEM for small events up to 40m.
Details the active 4-way COBRA-4 SYSTEM for medium events up to 80m.
Angle of incidence for distant listeners should be at least 5° to avoid attenuation.
Rules for spacing stacks, avoiding walls/corners, and height relative to listeners.
Lists dispersion angles for 1, 2, and 4 stacked COBRA TOPs.
Inclining a stack of 4 enclosures downwards yields SPL gain at FOH.
Describes the basic set: 4 COBRA TOPs, 4 COBRA SUBs, amp rack.
Integration of COBRA PWH bass horns for powerful bass reproduction.
Emphasizes adherence to safety regulations when hanging enclosures.
To Next Page
