11237 and 11238 Turbine Blade Arms 45 PSIG maximum.
11257, 11178 and 11179 Spear Arms
1-1/2"
11234 Double-Burrer Arm
• Deburrs both edges of
workpiece simultaneously.
• Contact wheels adjust for
material 1/8" to 5/8" thick.
Belt Size: 1/2" wide x 34" long.
11080 Contact Wheels: 1" diameter x 3/8" wide, rubber.
11240, 11241, 11244 and 11245 Extra-Length Arms
11254 Big Wheel Arm
• Grinds and polishes deep
slots or narrow groves.
• 1/4" to 1/2" wide wheels,
2-1/8" to 4-3/4" diameter
(specify size).
Belt Size: 1/4" to 1/2" W x 34" L.
11253 Arms (specify width)
11377 Contact Wheel: 2-1/8" dia. x 1/2" wide, urethane.
11378 Contact Wheel: 2-1/8" dia. x 1/4" wide, urethane.
11254 Arms (specify width)
11375 Contact Wheel: 4-3/4" dia. x 1/2" wide, urethane.
11375 Contact Wheel: 4-3/4" dia. x 1/4" wide, urethane.
11255 Cross-Bow Arm
• I.D. polishing or deburring
with one 180° wrist turn.
• Deburr leading radius of
1" to 4" round openings.
Belt Size: 1/2" W x 34" L.
Dynafile
®
Specialized Contact Arms
Designed to solve tough production problems.
11237: 1/4" wide x 24" long belts.
11066 Contact Wheel: 5/16" dia. x 1/8" wide steel wheel.
11238: 1/2" wide x 24" long belts.
Contact Wheel: 1/4" dia. x 3/8" wide steel wheel.
Strap Polish Area
9" Workable Reach:
11240 Arm: 11241 Arm:
Belt Size: 1/2" W x 34" L belts. Belt Size: 1/4" W x 34" L belts.
11078 Contact Wheel: 11074 Contact Wheel:
5/8" dia. x 3/8" wide, rubber. 5/8" dia. x 1/8" wide, rubber.
14" Workable Reach:
11244 Arm: 11245 Arm:
Belt Size: 1/2" W x 44" L belts. Belt Size: 1/4" W x 44" L belts.
11078 Contact Wheel: 11074 Contact Wheel:
5/8" dia. x 3/8" wide, rubber. 5/8" dia. x 1/8" wide, rubber.
10
11257: Custom-made. Specify usable length up to 32".
Specify 11068 - 5/16" diameter steel or 11078 - 5/8" diameter rubber
contact wheel.
11178: Has 9" reach with 11068 - 5/16" diameter steel contact wheel.
Belt Size: 1/2" W x 34" L (45 PSIG Max.).
11179: Has 9" reach with 11078 - 5/8" diameter rubber contact wheel.
Belt Size: 1/2" W x 34" L.
Belt Size: 1/2" W x 24" L.
11078 Contact Wheel: 5/8" diameter x 3/8" wide, rubber.
Platen: 1/2" W x 7/8" L.
11258 Stroke Sander Arm Blend stainless steel.
Belt Size: 1/2" W x 24" L, 60 to 80 grit.
11090 Contact Wheel: 5/8" diameter x 3/8" wide rubber.
• Guide wheels
prevent undercutting.
• Removes raised material
within .020" or less.
• Use 60 to 80 grit abrasive
belts with this arm.
11297 Guide-Cut Arm
To Next Page
Loading...