Belt Size: 1/4" W x 24" L.
11066 Contact Wheel: 5/16" diameter x 1/8" wide, steel.
11034 Platen: 1/4" wide.
11212 File round openings as small as 7/16".
45 PSIG maximum.
Belt Size: 1/2" W x 24" L.
11068 Contact Wheel: 5/16" diameter x 3/8" wide, steel.
11027 Platen: 1/2" wide.
11213 See 11239 for heavy-duty version.
45 PSIG maximum.
Belt Size: 1/2" W x 24" L.
11070 Contact Wheel: 7/16" diameter x 3/8" wide, rubber.
11025 Platen: 1/2" wide.
11214 Work on contact wheel or Dynapad
®
.
45 PSIG maximum.
Belt Size: 1/4" W x 24" L.
11072 Contact Wheel: 7/16" diameter x 1/8" wide, brass.
11034 Platen: 1/4" wide.
11215 Enter 1/2" x 1/2" openings.
Belt Size: 1/4" W x 24" L.
11074 Contact Wheel: 5/8" diameter x 1/8" wide, rubber.
11032 Platen: 1/4" wide
.
11216 Enter 5/16" x 3/4" openings.
Belt Size: 1/2" W x 24" L.
11076 Contact Wheel: 7/16" diameter x 3/8" wide, steel.
11027 Platen: 1/2" wide.
11217 Enter channels as narrow as 9/16".
11218 Standard arm on model 14000.
See 11228 for heavy-duty version.
Dynafile
®
Standard Contact Arms
Standard Contact Arms allow for a 4" workable reach.
9
Belt Size: 1/2" W x 24" L.
11078 Contact Wheel: 5/8" diameter x 3/8" wide, rubber.
11025 Platen: 1/2" wide.
Belt Size: 1/4" or 1/2" W x 24" L.
11080 Contact Wheel: 1" diameter x 3/8" wide, radiused rubber.
No Platen
11219 No platen due to offset design.
Grind radiuses, slack polish.
Offset for slack polishing
Belt Size: 1/2" W x 24" L.
11078 Contact Wheel: 5/8" diameter x 3/8" wide, rubber.
11025 Platen: 1/2" wide.
11228 Heavy-Duty Steel Optional 11028 Steel Platen
available for grinding.
Belt Size: 1/2" W x 24" L.
11084 Contact Wheel: 3/4" diameter x 1/2" wide, rubber.
11135 Platen: 1/2" wide.
11231 See 11243 for heavy-duty version.
Belt Size: 1/8" or 1/4" W x 24" L.
11086 Contact Wheel: 1" diameter x 3/8" wide, tapered urethane.
No Platen.
11232 For 1/8" Wide Belts No platen due to offset design.
Grind corners, strap polish.
V-Tapered
Belt Size: 1/2" W x 24" L.
11068 Contact Wheel: 5/16" diameter x 3/8" wide, steel.
11027 Platen: 1/2" wide.
Belt Size: 1/2" W x 24" L.
11084 Contact Wheel: 3/4" diameter x 1/2" wide, rubber.
11135 Platen: 1/2" wide.
11243 Heavy-Duty Grind over contact wheel or Dynapad
®
.
11239 Heavy-Duty Steel Grind in narrow areas.
45 PSIG maximum.
Belt Size: 1/2" W x 24" L.
11078 Contact Wheel: 5/8" diameter x 3/8" wide, rubber.
11026 Platen: 1/2" wide.
11262 "Offset Arm"
For flat grinding using platen at or near corners
and edges of large radius round. Contact wheel
is offset to prevent gouging.
To Next Page
Loading...