EasyManua.ls Logo

Dynaflite super decathlon User Manual

Dynaflite super decathlon
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
DECGP04 Printed in USA
READ THROUGH THE PRELIMINARY INFORMATION BEFORE YOU START
BUILDING. IT CONTAINS IMPORTANT INSTRUCTIONS, WARNINGS, AND
INFORMATION CONCERNING THE BUILDING AND USE OF THIS MODEL.
© 2011 Hobbico
®
, Inc V:2.0
Instruction Manual
•89” IMAA-legal aerobatic trainer
•Selig 8036 semi-symmetrical airfoil for maneuverability & low-speed stability
•Performance excels with a wide range of engines
WARRANTY
Dynaflite guarantees this kit to be free from defects in both material and workmanship at the date
of purchase. This warranty does not cover any component parts damaged by use or modification.
In no case shall Dynaflite’s liability exceed the original cost of the purchased kit. Further, Dynaflite
reserves the right to change or modify this warranty without notice. In that Dynaflite has no control
over the final assembly or material used for final assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of the final user-assembled product.
By the act of using the user-assembled product, the user accepts all resulting liability. If the buyer
is not prepared to accept the liability associated with the use of this product, return this kit
immediately in new and unused condition to the place of purchase.
Question and Answer IconNeed help?

Do you have a question about the Dynaflite super decathlon and is the answer not in the manual?

Dynaflite super decathlon Specifications

General IconGeneral
BrandDynaflite
Modelsuper decathlon
CategoryToy
LanguageEnglish

Summary

WARRANTY

PRECAUTIONS

BUILD THE TAIL SECTION

BUILD THE STABILIZER

BUILD THE ELEVATORS

BUILD THE WING

BUILD THE AILERONS

BUILD THE FUSELAGE

ASSEMBLE THE FIREWALL

Steps to build and prepare the firewall for engine mounting.

GLOW ENGINE INSTALLATION

Detailed process for installing a glow engine onto the firewall.

GAS ENGINE INSTALLATION

BUILD THE BULKHEADS AND THE FUSELAGE SIDES

ASSEMBLE THE FUSELAGE

MOUNT THE WING

MOUNT THE TAIL

FINAL ASSEMBLY

SET THE CONTROL THROWS

PREFLIGHT

AT THE FLYING SITE

GROUND CHECK YOUR MODEL

Detailed inspection of all components and systems before the first flight.

BALANCE THE MODEL LATERALLY

RANGE CHECK YOUR RADIO

SAFETY PRECAUTIONS

FLIGHT

Related product manuals