Need help?Do you have a question about the Dynam P-51D Mustang and is the answer not in the manual?
Outlines the sequence for powering on the transmitter, connecting the receiver, and preparing for flight.
Details the first steps of assembly, focusing on landing gear, wing joining, and attaching the wing to the fuselage.
Steps for connecting pushrods, servos, installing the propeller, spinner, and battery.
Explanation of control stick operation in Mode 1 and Mode 2, detailing movements for throttle, rudder, elevator, and ailerons.
General| Battery | 14.8V 2200mAh 4S LiPo (Required) |
|---|---|
| Material | EPO Foam |
| Skill Level | Intermediate |
| Paint Required | No |
| Decals Included | Yes |
| Type | RC Airplane |
| Control | 4 Channel |
| ESC | 50A Brushless |
| Servos | 9g |
| Channels | 4 |
| Glue Required | Yes |
| Motor | Brushless Outrunner Motor |
To Next Page
