Need help?Do you have a question about the Dynam Spitfire and is the answer not in the manual?
Explains symbols used in the manual for assembly guidance.
Instructions for operating the dynam 2.4G RC transmitter system.
Lists all components included in the Ready-To-Fly package.
Step-by-step guide for initial aircraft assembly, including wings and stabilizers.
Connecting servos, E-retract, and installing propeller, gun plastic, antenna, and battery.
Explains transmitter stick controls and their corresponding aircraft movements.
Guidance on setting the Center of Gravity and receiver connections.
Recommended control surface throw ranges for elevator, aileron, and rudder.
Details ESC specifications and lists programmable settings like brake and timing.
Step-by-step instructions for initial ESC setup and startup sequence.
Explains ESC alert signals, protection features, and common troubleshooting steps.
Illustrates an example of programming ESC functions via the transmitter.
Guide for normal ESC startup and calibrating the transmitter's throttle range.
Detailed steps for programming ESC functions via the transmitter.
Procedure to access the ESC's programming mode using the 2.4Ghz radio system.
Diagram illustrating the placement of decals on the aircraft model.
Essential safety warnings and guidelines for handling and charging Li-Po batteries.
Information on power sources required for the battery charger.
Details on LED indicators for battery charging and transmitter battery installation.
Comprehensive list of all components included in the RC aircraft kit.
General| Servos | 9g x 4 |
|---|---|
| Brand | Dynam |
| Model | Spitfire |
| Material | EPO Foam |
| Color | Green |
To Next Page
