- 10 –
Wire Management
Wires can be routed through the wire routing holes and/or zip tied as shown in Figure 11 with the included zip ties. Ensure enough
slack remains so the wires can move freely. Check that nothing is getting pinched or rubbing after running wires.
Figure 11 Wire Routing
Maintenance
To ensure the mount will work great for as long as possible follow these simple procedures;
1. Move the mount up and down at least twice a week, this keeps the seals in the gas springs oiled.
2. Lubricate all joints every 6 months.
3. Visually check all bolts to ensure nothing looks like it is coming loose.
Warranty
Dynamic Mounting guarantees the Down And Out Mount to be free of defects for the product’s warranty period of 3 years.
The warranty period begins on the original date of shipping. The limited warranty is intended only for the original purchaser. The
warranty will be void if the mount is modified in anyway or not installed correctly, Including overloading, abuse, or use for any
purpose other than specified in these directions. This mount is for indoor use only and the warranty will be voided if the mount is
used outdoors.
Dynamic Mounting is not liable for any damage or injury caused from the use of or the inability to use our mount. To the maximum
extent permitted by applicable law, Dynamic Mounting disclaims any responsibility for incidental or consequential damages.
Dynamic Mounting LLC
www.DynamicMounting.com
If you have any questions, please contact info1@dynamicmounting.com
If you would like to speak to someone please email us your phone number and when we can contact you.
To Previous Page
Loading...
