Dynamic DX Power Module PMB - Page 27

 ,QVWDOODWLRQ
22
0RWRUDQG3DUN%UDNH&RQQHFWRUV
Dynamic Connector and Lead Kits relating to Motor and Park Brake connections
are as follows. Leads and connectors can be ordered separately. These can be
ordered by contacting a Service Centre or Agent as given in Section 14.
'\QDPLF3DUW 'HVFULSWLRQ 4W\
DXLOOM-PM Power Module Connector Kit 1
GSM60182 DX Motor Connector Kit 2
GSM61191 DX Left Motor Loom 1
GSM61192 DX Right Motor Loom 1
GCN0787 DX Motor Connector Cover 2
Notes :
1. The type of cable used must be appropriate for the environmental and
mechanical abuse it is likely to encounter.
2. The four conductors should be sheathed, and the junction of the wires to the
plug should have strain relief.
3. It is preferable for both left and right motor looms to be of equal length.
Warning : The motor looms must be fixed so that there is no possibility that the
right and left motor plugs can be accidentally interchanged.
0LQLPXP:LUH6L]HV
Function Wire Size (PM Type) Terminal Part
PM / PM1 PM2
Motor + 3mm² 4mm² AMP Innergy 556880-2
Motor - 3mm² 4mm² AMP Innergy 556880-2
Park Brake + 0.5mm² 0.5mm² Positronic FC120N2
Park Brake - 0.5mm² 0.5mm² Positronic FC120N2