This document is an instruction manual for the Dynamic Sauna Infrared Sauna, specifically models DYN-6119-01, which are 1-2 person FAR Infrared Saunas.
Function Description:
The Dynamic Sauna is an infrared sauna designed for indoor use only. It utilizes FAR infrared light, which is a segment of the electromagnetic spectrum, to generate heat. Unlike traditional saunas that heat the air, infrared saunas directly heat the body. This process is believed to offer various health benefits, including pain relief, muscle spasm relaxation, increased blood circulation, cardiovascular conditioning, clearer skin, reduced cellulite, removal of toxins and mineral waste, stress and fatigue reduction, and enhanced skin tone. The sauna operates by emitting infrared rays that penetrate the body, causing a deep heating effect in both muscle tissues and internal organs without putting too much burden on the heart. It promotes perspiration, which helps in the natural cooling process of perspiring and aids in the removal of waste products like toxins, sodium, alcohol, nicotine, cholesterol, lead, nickel, and cadmium.
Important Technical Specifications:
- Model: DYN-6119-01
- Capacity: 1-2 Person
- Infrared Type: FAR Infrared
- Power Requirement: 120VAC 15AMP Dedicated Circuit Required.
- Electrical Components:
- Speakers (2)
- LED light (color light) (1)
- Control panel with BT (1)
- Sensor (1)
- Power supply (1)
- MP3 jack (1)
- Heater Power Layout:
- Left panel: 4PCS x 1000-300mm = 200W
- Right panel: 4PCS x 1000-300mm = 200W
- Back panel: 2PCS x 1000-300mm = 300W
- Bench heater panel: 1PC x 700-300mm = 100W
- TOTAL: 800W
- Temperature Range: The sauna room temperature is typically between 118 degrees Fahrenheit / 48 degrees Celsius and 122 degrees Fahrenheit / 50 degrees Celsius. The heat emitters will turn off when the set temperature is reached. The control panel allows users to set the temperature up to 150 degrees F / 65 degrees C, though it's noted that most users do not achieve 150 degrees F / 65 degrees C. The ambient temperature in the room should be below 72°F for the sauna to take longer to pre-heat.
- Timer: The timer can be set from 5 to 60 minutes.
Usage Features:
- Control Panel: The sauna features a control panel with buttons for power, heat, temperature adjustment (increase/decrease), timer adjustment (increase/decrease), and color light therapy system. It also includes Bluetooth functionality for connecting devices.
- Temperature Control: Users can set the desired temperature using the control panel. The "Heat" light indicates when the heaters are active.
- Timer Function: The sauna session duration can be set using the timer buttons.
- Color Light Therapy System: The interior light can be turned ON/OFF and its color changed. The system offers multiple color selections, including "white" as a first selection and "white" as a second selection for different shades of colors.
- Bluetooth and MP3 Jack: The control panel has Bluetooth functionality for pairing devices and an MP3 jack for connecting musical devices via an AUX wire.
- Pre-heating: It is recommended to allow the sauna to pre-heat for a comfortable level before entering. The time it takes to reach the set temperature varies based on the ambient room temperature.
- Hydration: Users should drink water prior to, during, and after a sauna session to replenish body fluids.
- Cooling Down: After 3 hours of continuous use, the sauna needs to be shut down for one hour.
- Safety Precautions:
- Always read and follow all instructions carefully.
- Assemble the sauna according to electrical equipment safety precautions.
- Do not allow children to use the sauna unless supervised by an adult.
- Do not sleep inside the sauna.
- Avoid burns; do not touch the heating element.
- Do not spray or get water on the exterior/interior walls of the sauna room.
- Do not store flammable objects or chemical substances near the sauna.
- Do not attempt to make any repairs yourself unless authorized by the manufacturer or its agent.
- Ensure the power outlet meets the specifications required.
- Do not pour water or any other liquids onto the infrared heat emitters.
- Do not bump, hit, or break the heating elements.
- Do not make any modifications to the sauna, the sauna structure, or the sauna components.
- Prior to each sauna session, the sauna room should be inspected for correct operation.
Maintenance Features:
- Cleaning: Do not use liquid cleaners or aerosol cleansers inside the sauna. Unplug the sauna from the wall outlet before cleaning. Use plain water and a soft cloth for cleaning. Do not use benzene, alcohol, or strong cleaning chemicals in or on the sauna. These chemicals can damage the wood or be absorbed into the wood, which will damage the sauna.
- Troubleshooting Guide: The manual provides a comprehensive troubleshooting guide for common issues such as power supply problems, indicator light malfunctions, heater issues, odor, light bulb failure, speaker malfunction, and CD-player issues, along with possible reasons and countermeasures.
- Warranty: The product comes with a 5-year limited warranty on heating elements, electronics, and wood structure, and a 1-year limited warranty on the radio and wood structure. The warranty is void if the sauna is used for outdoor purposes.
- Warranty Card: A warranty card is included for registration, requiring information such as name, address, phone number, purchase date, purchase from, and serial number. The serial number is located on the sauna's front panel, rear panel, or on the carton.
To Next Page
Need help?
General
