I. Buckles:
Assembly
Please note the following:
A. You will need a Philips screwdriver, ladder, and two adults to assemble.
B. Do not plug any other appliances into the power supply of the sauna room other
than the designated sauna connections/plugs.
C. Assemble the sauna room on a completely level surface.
D. Do not spray or get water on the exterior/interior walls of the sauna room. If the floor
which the sauna will sit on is damp or wet, install a barrier between your floor and
the sauna floor to keep the sauna’s floor from becoming damp or wet.
E. Do not store flammable objects or chemical substances near the sauna.
F. 1-person model is packed into one single carton.
1. First, locate where the sauna is going to be assembled. Make sure you have plenty
of room to move around the sauna during assembly. Remove the front wall panel
from the carton and stand it upright at the location where it will be assembled. One
adult will need to continue to hold the front wall panel. (see FIG 1)
FIG 1 Front Panel
Page 7
To Next Page
Loading...