Dynamite Passport P2 - User Manual

Passport
™
P2 AC
Plus 2 Port AC/DC
Multi-Charger
Manual Addendum
BLUETOOTH CONNECTION
Download the Dynamite Dashboard App from the iOS store or Google Play
store. All Charger features are accessible from the app.
Compatible with iOS and Android devices
1. Download the Dynamite Dashboard App from the iOS or Play Store.
2. Install the app and verify the Bluetooth is activated on the mobile device.
3. Power on the charger, and open the app. The app will open a dialog box
that says Bluetooth Device, touch the line that says charger to connect.
The Bluetooth Icon will illuminate on the charger when it is connected.
4. Set a password the fi rst time the app is opened. We suggest writing the
password on the back of the charger in permanent marker.
USING THE MOBILE APP
1. Touch and slide the selections to scroll between options.
2. Press the NEXT button when the correct selections have been made.
DYNAMITE DASHBOARD APP
It has come to our attention the manual for the Passport P2 AC/DC Multi-
Charger did not included instructions for using the mobile app. The information
in this addendum covers operation of the Dynamite Dashboard App.
Battery
Type
HOME PROGRAM SYSTEM
LiPo
LiIo
LiFe
LiHV
NiMH
NiCD
1
2
3
4
5
6
BAL. CHARGE
CHARGE
DISCHARGE
STORAGE
SCAN TO GO
FAST CHARGE
Battery
Cells
Operation
Mode
NEXT
Battery
Type
Battery
Type
L
Type
L
N
LiPo
LiIo
LiFe
LiHV
LiHV
LiFe
LiHV
NiMH
NiCD
LiHV
CH.DCH.B CH.CCH.A

Dynamite Passport P2 Specifications

General

Input Voltage	100-240V AC
Cell Count	1-6S LiPo/LiFe/LiIon, 1-15C NiMH/NiCd, 2-20V Pb
Charging Ports	1
LED Indicators	Yes
Charge Rate	0.1-6.0A
Battery Type	LiPo, LiFe, LiIon, NiMH, NiCd, Pb
Discharge Rate	0.1-2.0A

Summary

Bluetooth Connection Guide

App Download and Connection Steps

Guide to downloading the app, activating Bluetooth, and connecting the charger via the mobile app.

Using the Mobile App Interface

Navigating App Selections and Options

Instructions on scrolling through options and confirming selections using the app's interface.

Scan To Go Feature

Generating Custom Battery QR Codes

Steps to create personalized QR codes for battery profiles by saving memory settings from the app.

Using QR Codes for Automatic Setup

Process for scanning a battery's QR code with the app to apply charging parameters and begin.