EasyManuals Logo

Dynamite Prophet Sport Lipo User Manual

Dynamite Prophet Sport Lipo
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
D
C
B
A
F
G
E
H
NOTICE
The following features are standard on your Dynamite
®
Prophet™ 25W AC
Battery Charger:
• Li-Ion/Li-Po/Li-Fe battery cell count of 2 to 3 series cells
• Adjustable charge current settings of 0.5A, 1.0A and 2.0A
• Short-circuit, over-current and reverse polarity protection
• Built in balance circuit
• Meets IP33CW, IK07 environmental specs
Specifi cations
The following specifi cations are standard on your Dynamite Prophet AC
Battery Charger:
• Maximum charge power of 25W
• LED charge indicators for each charge current; 0.5A, 1.0A and 2.0A
• Operating temperature: 0°C to +50°C
The following terms are used throughout the product literature to indicate vari-
ous levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physi-
cal property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of
physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of
property damage, collateral damage, and serious injury OR create a high prob-
ability of superfi cial injury.
Meaning of Special Language
Look at the charger to see:
A. Cell Selection Switch (3S or 2S)
B. Li-Fe LED color (green)
C. Li-Po LED color (red)
D. AC power plug
E. 2S battery pack connection
F. 3S battery pack connection
G. Charge Rate LED indicators
(2A, 1A and 0.5A)
H. Start/Stop button

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynamite Prophet Sport Lipo and is the answer not in the manual?

Dynamite Prophet Sport Lipo Specifications

General IconGeneral
BrandDynamite
ModelProphet Sport Lipo
CategoryBattery Charger
LanguageEnglish

Related product manuals