Dynamite VISION PEAK ULTRA - User Manual

For 1–8 Cell Ni-Cd, Ni-MH and 1–3 Cell Lithium Polymer (Li-Po) Battery Packs
• Vision LCD icon shows charge status
• Multi-function LCD shows charge time, charge current and voltage
• Charges virtually all 1- to 8-cell Ni-MH & Ni-Cd packs and
1- to 3-cell Li-Po packs
• Adjustable charge rates from 0.1A–5A
• Input and output circuit protection
• Automatic trickle charge
• Limited 5-year warranty
Safety Precautions
• Do not leave your battery and charger unattended during use.
• Always allow charger to cool between charges.
• Never connect the charger to an automobile 12V battery while the vehicle is running.
• Faceplate can become hot during charging. Keep the charger away from any material
that may be affected by heat.
• Carefully observe connector polarities at all times.
• Do not let children charge battery packs without adult supervision.
• If either charger or battery becomes hot to the touch during the charge process, end
the charge process immediately.
Warranty and Repair Policy
This charger is guaranteed against workmanship and manufacturing defects for a period
of 5 years from the original date of purchase. This warranty is limited to the original
purchaser and is not transferable. Warranty repair will not cover units that have been
modified, misused or serviced by an unauthorized service center.
To speak to a service technician, call 1-877-504-0233.
If your charger needs to be repaired, ship the charger in its original box (freight prepaid) to:
Horizon Service Center
Attn: Dynamite Service
4105 Fieldstone Rd.
Champaign, IL 61822
Include your complete name and address information inside the carton and clearly write
it on the outer label/return address area. Include a brief summary of the difficulty. Date
your correspondence and be sure that your name and address appear on this enclosure.
Also, please include a phone number where you can be reached during the business day.
Warranty Repairs
To receive warranty service, you must include your original sales receipt verifying the
proof-of-purchase date. Providing warranty conditions have been met, your charger will
be repaired free of charge.
Non-Warranty Repairs
Should your repair cost exceed 50% of the retail purchase cost, you will be provided
with an estimate advising you of your options. Any return freight for non-warranty
repairs will be billed to the consumer. For non-warranty repairs, please advise us of the
credit card you prefer to use. Horizon Service Center accepts Visa and MasterCard.
Please include your card number and expiration date. Horizon Service Center also
accepts money orders.
5
Made in Taiwan
© 2004 Horizon Hobby, Inc.
Dynamite
®
products are distributed exclusively by Horizon Hobby, Inc., Champaign, IL U.S.A.
www.horizonhobby.com
7095
Fuses
This charger is protected by a 2 amp glass fuse. If you need to replace a fuse, your
local hobby retailer should be able to supply one. You can also find replacement fuses
at automotive stores. Always replace your fuse with a new fuse of the same rating.
VISION PEAK
™
ULTRA
AC/DC Peak Charger
7095 DYN Vision Peak Ultra Inst 7/29/04 10:23 AM Page 1

Summary

Fuses

Safety Precautions

Warranty and Repair Policy

Warranty Repairs

Explains the process for obtaining free repairs under the product's warranty.

Non-Warranty Repairs

Details the procedure and cost considerations for repairs outside the warranty period.

Introduction

Operating Guidelines

Connecting the Input Power Source

Guides users on connecting the charger to either a 110V AC outlet or a 12V DC power source.

Setting the Charge Perimeters

Instructs on selecting battery chemistry and initial charge settings via LED indicators and buttons.

Adjusting Charge Current During the Fast Charge Period

Explains how to modify the charge current setting while the fast charge process is active.

Volts

Describes monitoring the real-time charge voltage to assess the battery's current charge state.

Peak Volts

Details monitoring the highest voltage reached by the battery during the charging cycle.

Trickle Charge

Explains the low current, pulsed trickle charge mode applied after fast charging is complete.

Boost (Repeak) Mode

Describes the 'Boost' mode for 'topping off' the battery with short fast charge intervals.

Charge Timer

Explains how the timer records fast charge duration to estimate applied charge capacity.

Dynamite VISION PEAK ULTRA Specifications

General

Circuit Power (Charge)	50W
Circuit Power (Discharge)	5W
Input Voltage	100-240V AC
Battery Type	NiMH/NiCd
Cell Count	1-6S