Need help?Do you have a question about the Dynaset HKR 1300 and is the answer not in the manual?
Emphasizes compliance with local safety regulations and constant observation of equipment condition due to high pressures.
Warns about hot parts, high-pressure air, and not aiming compressed air at people. Advises against exceeding pressure/temperature limits.
Stresses that installation and service must be performed by qualified personnel and emphasizes keeping components clean.
Details the integrated multiblock in HKR 1300-7500 models, housing thermostat, filter, separator, and valves.
Describes the element used to recover residual oil from the air, separating it and returning it to circulation.
Details the function of the minimum pressure valve as a pressure holding and non-return valve for oil supply and separation.
Describes the oil filter with a 20 µm mesh and a bypass valve for cold oil or soiled filters.
Provides a crucial attention note to read instructions before installation and discusses base machine hydraulic systems.
Outlines common hydraulic systems (open centre, closed centre LS, fixed displacement) and advises identifying the machine's system.
Covers general guidelines for placing the product, ensuring access and ventilation, and considering maximum inclinations.
Covers specific installation aspects for the HKR compressor.
Details connecting the compressor to the air supply system, including pipe diameter and length recommendations.
Explains how to start the compressor by opening the hydraulic control valve, ensuring it's decompressed.
Details the procedure for changing compressor oil, including operating temperature, oil fill capacities for models, and filter replacement recommendation.
Explains that the oil filter must be replaced at every oil change and provides steps for removal and installation.
Guides on replacing the air-oil separating element, emphasizing proper disposal and the impact of air quality/oil quality.
Provides instructions for replacing the air filter element, stressing prevention of dirt ingress and prohibiting cleaning.
Offers a comprehensive table of common failures, their reasons, and corrective actions, requiring qualified mechanics.
Emphasizes compliance with local safety regulations and constant observation of equipment condition due to high pressures.
Warns about hot parts, high-pressure air, and not aiming compressed air at people. Advises against exceeding pressure/temperature limits.
Stresses that installation and service must be performed by qualified personnel and emphasizes keeping components clean.
Details the integrated multiblock in HKR 1300-7500 models, housing thermostat, filter, separator, and valves.
Describes the element used to recover residual oil from the air, separating it and returning it to circulation.
Details the function of the minimum pressure valve as a pressure holding and non-return valve for oil supply and separation.
Describes the oil filter with a 20 µm mesh and a bypass valve for cold oil or soiled filters.
Provides a crucial attention note to read instructions before installation and discusses base machine hydraulic systems.
Outlines common hydraulic systems (open centre, closed centre LS, fixed displacement) and advises identifying the machine's system.
Covers general guidelines for placing the product, ensuring access and ventilation, and considering maximum inclinations.
Covers specific installation aspects for the HKR compressor.
Details connecting the compressor to the air supply system, including pipe diameter and length recommendations.
Explains how to start the compressor by opening the hydraulic control valve, ensuring it's decompressed.
Details the procedure for changing compressor oil, including operating temperature, oil fill capacities for models, and filter replacement recommendation.
Explains that the oil filter must be replaced at every oil change and provides steps for removal and installation.
Guides on replacing the air-oil separating element, emphasizing proper disposal and the impact of air quality/oil quality.
Provides instructions for replacing the air filter element, stressing prevention of dirt ingress and prohibiting cleaning.
Offers a comprehensive table of common failures, their reasons, and corrective actions, requiring qualified mechanics.
General| Brand | Dynaset |
|---|---|
| Model | HKR 1300 |
| Category | Air Compressor |
| Language | English |
To Next Page
