Need help?Do you have a question about the Dynaset HKR 2000 and is the answer not in the manual?
Compact and integrated all-in-one units for mobile installation, converting hydraulic power to compressed air.
Details information shown on the product type plate, including identification key, product code, serial number, etc.
Identifies and labels the main components of the HKR compressor with a diagram.
Emphasizes compliance with local safety regulations and awareness of high pressure in circuits.
Warns about hot parts, high-pressure air, and not aiming compressed air at people.
Stresses that installation and service must be performed by qualified personnel and keeping the system clean.
Discusses different types of hydraulic systems in base machines (open centre, closed centre, fixed displacement).
Crucial checks before first-time startup, including ensuring the unit is filled with oil.
Procedure for starting the compressor, ensuring it is decompressed and hydraulic flow is available.
Provides a schedule for routine maintenance tasks like checking oil level and changing filters.
Specifies approved oil types (mineral, synthetic, bio-oils) and their properties for HKR compressors.
Explicitly prohibits the use of multi-grade oils due to viscosity improver degradation.
Instructions for checking the oil level, showing the location of the filler cap for different models.
Procedure for changing compressor oil, including operating temperature and oil fill capacities.
Instructions for replacing the oil filter cartridge, including disposal of the old one.
Instructions for replacing the air-oil separating element, noting disposal and causes of premature need.
Procedure for replacing the air filter element, emphasizing prevention of dirt ingress.
Table of common failures, reasons, and corrective actions for compressor operation.
Compact and integrated all-in-one units for mobile installation, converting hydraulic power to compressed air.
Details information shown on the product type plate, including identification key, product code, serial number, etc.
Identifies and labels the main components of the HKR compressor with a diagram.
Emphasizes compliance with local safety regulations and awareness of high pressure in circuits.
Warns about hot parts, high-pressure air, and not aiming compressed air at people.
Stresses that installation and service must be performed by qualified personnel and keeping the system clean.
Discusses different types of hydraulic systems in base machines (open centre, closed centre, fixed displacement).
Crucial checks before first-time startup, including ensuring the unit is filled with oil.
Procedure for starting the compressor, ensuring it is decompressed and hydraulic flow is available.
Provides a schedule for routine maintenance tasks like checking oil level and changing filters.
Specifies approved oil types (mineral, synthetic, bio-oils) and their properties for HKR compressors.
Explicitly prohibits the use of multi-grade oils due to viscosity improver degradation.
Instructions for checking the oil level, showing the location of the filler cap for different models.
Procedure for changing compressor oil, including operating temperature and oil fill capacities.
Instructions for replacing the oil filter cartridge, including disposal of the old one.
Instructions for replacing the air-oil separating element, noting disposal and causes of premature need.
Procedure for replacing the air filter element, emphasizing prevention of dirt ingress.
Table of common failures, reasons, and corrective actions for compressor operation.
General| Brand | Dynaset |
|---|---|
| Model | HKR 2000 |
| Category | Air Compressor |
| Language | English |
To Next Page
