49
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
NOTE!
Guide values at 60% relative humidity and 10 bar ultimate pressure.
Quality Oil change max hours Supplier ISO VG Details
Shell Corena 4S R 2500h or 12 months Shell 46-68 Synthetic oil
Castrol Aircol SR 2500h or 12 months Shell 46-68 Synthetic oil
Rarus SHC 1020 2500h or 12 months Exxon Mobil 46-68 Synthetic oil
6.4. CLEANING THE COMPRESSOR
ATTENTION!
Keep the HKR compressor clean to enable its safe and longlife operation.
Check and clean your HKR compressor after every work shift.
The compressor block should be checked on a daily basis and cleaned when
necessary. To clean the unit use blow gun.
To Next Page
Loading...
