57
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
5. Stop the compressor and wait for 1 minute standstill
STOP
1min
6. Check the oil level, fill up the missing oil quantity up to the maximum level.
OIL
MAX
MIN
6.8. REPLACING AIROIL SEPARATING ELEMENTS
ATTENTION!
Dispose of the old separating element in accordance with the applicable
regulations.
Heavily soiled intake air or low-quality oil cause heavier soiling of
the separting element, which can result in the premature need for
replacement.
To Next Page
Loading...
