Dynaset HKR 2000 - Default Chapter; Table of Contents

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
TABLE OF CONTENTS
1. GENERAL 7
1.1. PRODUCT INFORMATION 7
1.2. PRODUCT IDENTIFICATION KEY 7
1.3. TYPE PLATE 8
1.4. HKR COMPRESSOR LINEUP 9
1.5. MAIN COMPONENTS OF HKR COMPRESSOR 10
2. SAFETY 11
2.1. SAFETY PRECAUTIONS 11
2.2. SAFETY EQUIPMENT 11
2.3. OPERATING SAFETY 12
2.4. MAINTENANCE SAFETY 13
2.5. WARNING LABELS 13
3. OPERATING PRINCIPLES 15
3.1. OPERATING DESCRIPTION 15
3.2. LUBRICATION SYSTEM OF COMPRESSOR 17
3.3. PRESSURE AND COMPRESSION RATIO 17
3.4. INTAKE VALVE 18
3.4.1. FUNCTIONAL PRINCIPLE OF PNEUMATIC INTAKE CONTROL 19
3.5. MULTIBLOCK 20
3.6. OIL NONRETURN VALVE 22
3.7. AIROIL SEPARATING ELEMENT 23
3.8. MINIMUM PRESSURE VALVE 24
3.9. OIL FILTER 25
3.10. OIL THERMOSTAT 26
4. INSTALLATION 27
4.1. BEFORE INSTALLATION 27
4.1.1. HYDRAULIC SYSTEM OF A BASE MACHINE 27
4.1.2. DYNASET VALVES 34
4.2. INSTALLING DYNASET HYDRAULIC PRODUCT 35
4.2.1. PLACING DYNASET HYDRAULIC PRODUCT 35
4.2.2. INSTALLING DYNASET VALVES 35
4.2.3. CONNECTING HYDRAULIC HOSES 35
4.2.4. HYDRAULIC FLUIDS 37
4.3. INSTALLING HKR COMPRESSOR 37
4.3.1. MAXIMUM INCLINATIONS 37
4.3.2. CONNECTION TO THE AIR SUPPLY SYSTEM 38