26
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
OPERATING PRINCIPLES
3.10. OIL THERMOSTAT
The DYNASET HKR is equipped with an integrated oil thermostat. This is located
above the oil filter and is accessible from the outside (left side – viewed from the
drive side).
The oil thermostat opens the connection to the heat exchanger when the
operating temperature is reached. The oil thermostat controls the temperature of
the system as the process continues. In the startup phase thermostat is closed and
operating temperature is reached faster.
Picture 16: Operating principle of oil thermostat
A. Oil thermostat closed
B. Oil thermostat open
To Next Page
Loading...