12
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
SAFETY
2.3. OPERATING SAFETY
When operating the compressor, beware of unit parts warmed by hot hydraulic
oil.
WARNING
RISK OF BURNS!
Parts of the unit, oil, and oil filler cap
can be hotter than 80 °C!
Wear personal safety equipment!
Never aim compressed air at a person.
WARNING
HIGH PRESSURE AIR!
Never aim compressed air at a person.
Can cause severe injuries.
ATTENTION!
Do not exceed the maximum pressure, temperature and load.
To Next Page
Loading...
