55
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
10. Open oil filler cap, check the oil level fill and top up the missing oil quantity
again up to the maximum level if required.
OIL
MAX
MIN
6.7. REPLACING OIL FILTER
The oil filter must be replaced at every oil change.
ATTENTION!
Dispose of the old oil filter cartridge in accordance with the applicable
regulations.
1. Remove the oil filter cartridge with a suitable tool.
To Next Page
Loading...
