54
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
6. Close the oil filler cap firmly onto the filler neck by hand.
7. Start the compressor and close the supply line. Allow compressor run for three
minutes.
START
3min
8. Stop the compressor and wait for 1 minute standstill
STOP
1min
9. Depressurize the system completely by opening air supply line and loosening
the oil filler cap.
To Next Page
Loading...
