71
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
DECLARATION OF CONFORMITY
9. DECLARATION OF CONFORMITY
We hereby declare that the design and manufacture of the product stated below
are in conformity with the provisions of the European Parliament and Councils on
the harmonization of the laws of Member States on the safety of machines.
Machine directive 2006/42/EC
LVD directive 2006/95/EC
EMC directive 2004/108/EC
Applied conformity standards:
CEN EN ISO 4413: EN ISO 4413:2010 Hydraulic fluid power -
General rules and safety requirements for systems and their
components.
EN60204-1 Safety of machinery – Electrical equipment of
machines.
Manufacturer: DYNASET Oy
Menotie 3, FI-33470 Ylöjärvi, Finland
Product group: HYDRAULIC COMPRESSORS
Product: HKR Hydraulic screw compressors
If the device has been modified by someone other than the manufacturer or
without the manufacturer’s permission, this declaration is not valid.
Timo Nieminen
R&D Manager
Ylöjärvi, Finland 01.12.2015
To Next Page
Loading...
