53
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
2. Open the oil drain plug with allen key.
3. Drain the used oil to a suitable container, clean the oil drain plug and put it
back.
4. Replace the oil filter. SEE CHAPTER “6.7. Replacing Oil filter”.
5. Add oil up to the maximum level.
MAX
MIN
OIL
To Next Page
Loading...
