Dynaset HKR 2000 - Page 4

Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
TABLE OF CONTENTS
5. OPERATION 39
5.1. BEFORE STARTING THE COMPRESSOR 39
5.2. STARTING THE COMPRESSOR 40
5.3. AIR AND OIL TEMPERATURES 41
5.4. AIR HUMIDITY 42
5.5. OFFLOAD MODE 43
5.6. COLD STARTS 43
5.7. STOPPING THE COMPRESSOR 44
6. MAINTENANCE 45
6.1. MAINTENANCE INTERVALS 46
6.2. HYDRAULIC FLUIDS 46
6.3. COMPRESSOR OILS 47
6.3.1. MULTIGRADE OIL 48
6.3.2. TEMPERATURES AND OIL TYPES 48
6.4. CLEANING THE COMPRESSOR 49
6.5. OIL LEVEL CHECK 50
6.6. OIL CHANGE 52
6.7. REPLACING OIL FILTER 55
6.8. REPLACING AIROIL SEPARATING ELEMENTS 57
6.9. REPLACING AIR FILTER ELEMENT 59
6.10. ADJUST THE OFFLOAD PRESSURE 61
6.11. TROUBLESHOOTING 62
7. MANUFACTURER’S LIMITED WARRANTY 67
8. PRODUCT DISPOSAL 69
9. DECLARATION OF CONFORMITY 71
10. TECHNICAL SPECIFICATIONS 73