58
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC SCREW COMPRESSORS
MAINTENANCE
1. Remove the air-oil separating element(s) with a suitable tool.
2. Lubricate the seal of the new air-oil separating element with clean oil or grease.
OIL
3. Insert the new air-oil separating element onto the multiblock and tighten by
hand. Use of a tool is prohibited.
To Next Page
Loading...
