Dynatron 900+ - Physical Features

Dynatron 900
+™
3
SECTION II
PHYSICAL FEATURES
Before operating the Dynatron 900+, acquaint yourself with the physical and operational aspects of the
device by reviewing the instructions and illustrations within this manual. The numbered features in the
diagrams located at the end of this section correspond to the numbered descriptions on the following pages.
Before administering treatment(s), read the sections in this manual that provide specific instructions for
performing treatments, definitions of the available options, as well as the contraindications warnings, and
precautions.
SPECIFICATIONS
*Designs and specifications are subject to change without notice
Traction Force
Press RESET + SP keys in combination to select one of three
ranges with the following maximum traction forces:
40 lbs. (approximately 18kg, 180N)
110 lbs (approximately 50kg, 490N)
200 lbs. (approximately 91kg, 890N)
Note: ± 5 lbs (2.5kg, 25N) for all settings
Traction Force Compensation
Computerized Automatic Compensation
Force Units
Pounds, Kilograms or Newtons
Hold/Rest Time
1-99 sec. independently set
Treatment Time
1-99 min. ±2%
Traction Speed
9-35 sec./ 0-200 lbs. - variable speed motor – stepless,
continuous and adjustable
Continuous Traction / Release Time
00～99 seconds, by static traction force “--” selection
Safety System
Multiple protection alarms – service / overload / min>max /
remote
Power Supply
110V, 220V, 230V, 240V, (option) 50/60Hz
Current
1.2A (100V, 110V, 120V)
0.6A(220V, 230V, 240V)
Fuses
F 1.6A 250V (for 100V,110V,120V)
F 0.8A 250V (for 220V,230V,240V)
Power Consumption
150VA max.
Voltage Tolerance
Max ±10％
Leakage
Less than 100μA
Grounding
Three-prong hospital grade plug with cord
Ground Resistance
< 0.1Ω
Safety Class
Class I / Type BF (IEC 60601-1)
EMC Tested
IEC 60601 / 1-2 Requirements
Classification of equipment
Class II ( IIb ) as per MDD 93/42 / EEC Annex IX
Dimensions
13.4 (L) x 10.6 (W) x 10.6 (H) inches
34 (L) x 27 (W) x 27 (H) cm
Weight
30 lb. (13.6 kg)