SIMULTANEOUS TREATMENTS
DYNATRON® 25 SERIES™ | OPERATOR’S MANUAL 68
All channels that are currently operational but not in focus, are listed both in the CHANNELS window and in small font on
the le-hand side of the Treatment Display Screen under the heading, RUNNING TREATMENTS. Included in the list under
RUNNING TREATMENTS, is the active channel(s) illuminated in YELLOW; and the name of the treatment modality with
the remaining treatment time, both illuminated in White.
To change the settings for a channel or output that has a YELLOW light, press the CHANNELS toggle key one or more times
until the light for the desired channel becomes GREEN. e TIME and INTENSITY displays change to show the parameters
currently in eect for that treatment. Once a treatment is in focus, the parameters may be changed.
To Next Page
Loading...
