To Next Page
M
Mr. Thomas Lopez DVMSep 8, 2025
Why does my Dynex DX-19E310NA15 have poor color but good sound?
- DDrew StephensSep 8, 2025
If your Dynex LED TV has good sound but poor color, adjust the contrast, color, and brightness settings.
Why does my Dynex DX-19E310NA15 have poor color but good sound?
If your Dynex LED TV has good sound but poor color, adjust the contrast, color, and brightness settings.
How to fix sound on my Dynex DX-19E310NA15?
If your Dynex LED TV has good picture but no sound, try increasing the volume and unplug any headphones that may be connected. Make sure the sound is not muted and that the correct audio mode is selected. Check that the audio cables are connected correctly and securely to the back of your TV. Ensure the antenna or cable TV is connected correctly and securely. If you're using an antenna, check the digital channel signal strength. Also, the audio cables you are using may be bad, so try a new set.
How to stop audio noise on Dynex DX-19E310NA15 LED TV?
If you're experiencing audio noise on your Dynex LED TV, it might be due to interference from other devices. Try turning off one device at a time (like surround sound receivers, external speakers, fans, or hair dryers) to see which one is causing the problem. Once identified, move the interfering device further away from your TV.
How to fix color on Dynex LED TV?
If your Dynex LED TV has no color, a dark picture, or the color is not correct, try changing to another channel as the station may be experiencing problems. Adjust the color saturation. Make sure that the video cables are connected correctly and securely to the side or back of your TV. Make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
What to do if my Dynex LED TV says 'No signal'?
If your Dynex LED TV displays a 'No signal' error message, first press the INPUT button to select the correct input for your device. If you're using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view those channels.
Why is my Dynex DX-19E310NA15 LED TV remote not working?
If your Dynex LED TV remote control isn't working, ensure the AC power adapter is correctly connected to your TV and a working power outlet. Also, make sure there are no obstructions between the remote and the sensor on the TV's front. Point the remote directly at the sensor. Check that the batteries are correctly installed or replace them with new ones.
Why is my Dynex LED TV picture blurry?
If your Dynex LED TV has a poor picture, make sure that the room is not too bright because light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor, so turn off one or more devices.
How to fix one speaker not working on Dynex DX-19E310NA15?
If there is no output from one of the speakers on your Dynex LED TV, adjust the audio balance. Make sure that the audio cables are connected correctly and securely to the back of your TV.
Why is my Dynex DX-19E310NA15 LED TV screen dark but sound is fine?
If your Dynex LED TV has a dark, poor, or no picture (but the screen is lit) and the sound is good, try changing to another channel as the station may be experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. Adjust the brightness. Make sure that the correct picture mode is selected. If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure that the video cables are connected securely to the side or back of your TV. The video cable(s) you are using may be bad, so try a new set.
Why won't my Dynex DX-19E310NA15 turn on?
If your Dynex LED TV has no power, ensure that the AC power adapter is correctly connected to your TV and a working power outlet. Unplug the AC power adapter, wait 60 seconds, then plug the adapter back in and turn on your TV. Other devices may be interfering with your TV, so try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
General| Screen Size | 19 inches |
|---|---|
| Display Type | LED |
| Resolution | 1366 x 768 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Component Video Input | 1 |
| Composite Video Input | 1 |
| Tuner | ATSC/NTSC |
| Aspect Ratio | 16:9 |
| Power Consumption | 25W |
| Inputs | HDMI, USB, Composite |
| Sound Output | 10W (2 x 5W) |
Guidelines for safe television placement to prevent accidents and damage.
Follow manufacturer recommendations for safe installation and use of your television.
Instructions and precautions for mounting the TV on a wall or ceiling.
Precautions to reduce the risk of electric shock and exposure to moisture.
Protecting your TV from lightning, power surges, and proximity to power lines.
Instructions for installing the TV stand or preparing for wall mounting.
Installing batteries and aiming the remote control for operation.
Common problems and solutions for video and audio issues.
