Dynex DX-19E310NA15 User Manual (English)

Other manuals for Dynex DX-19E310NA15

Questions and Answers:

L
Lance MillerSep 1, 2025
Why is my Dynex LED TV showing static?
- L
  Leah PhillipsSep 1, 2025
  If your Dynex LED TV displays only snow (noise) on the screen, try changing to another channel as the station may be experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so check the digital channel signal strength. Adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
J
jessica39Aug 30, 2025
Why does my Dynex LED TV have lines on the screen?
- C
  cassandra42Aug 31, 2025
  If your Dynex LED TV shows dotted lines or stripes on the screen, ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so check the digital channel signal strength. Adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Make sure that the video cables are connected securely to the side or back of your TV. The video cables you are using may be bad, so try a new set. Other devices may be interfering with your TV, so try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
C
Cristina FrancisAug 29, 2025
Why is my Dynex DX-19E310NA15 LED TV remote not working?
- R
  rodgersjulieAug 29, 2025
  If your Dynex LED TV remote control isn't working, ensure the AC power adapter is correctly connected to your TV and a working power outlet. Also, make sure there are no obstructions between the remote and the sensor on the TV's front. Point the remote directly at the sensor. Check that the batteries are correctly installed or replace them with new ones.
J
Justin EvansAug 27, 2025
What to do if my Dynex LED TV says 'No signal'?
- F
  Frank WilliamsAug 27, 2025
  If your Dynex LED TV displays a 'No signal' error message, first press the INPUT button to select the correct input for your device. If you're using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input on your TV to view those channels.
V
Victoria FloresAug 26, 2025
How to fix color on Dynex LED TV?
- W
  weissbeverlyAug 26, 2025
  If your Dynex LED TV has no color, a dark picture, or the color is not correct, try changing to another channel as the station may be experiencing problems. Adjust the color saturation. Make sure that the video cables are connected correctly and securely to the side or back of your TV. Make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
D
Danielle ThomasAug 25, 2025
How to stop audio noise on Dynex DX-19E310NA15 LED TV?
- R
  Renee HenryAug 25, 2025
  If you're experiencing audio noise on your Dynex LED TV, it might be due to interference from other devices. Try turning off one device at a time (like surround sound receivers, external speakers, fans, or hair dryers) to see which one is causing the problem. Once identified, move the interfering device further away from your TV.
A
Andrew SandersAug 23, 2025
How to fix sound on my Dynex DX-19E310NA15?
- T
  Travis FisherAug 23, 2025
  If your Dynex LED TV has good picture but no sound, try increasing the volume and unplug any headphones that may be connected. Make sure the sound is not muted and that the correct audio mode is selected. Check that the audio cables are connected correctly and securely to the back of your TV. Ensure the antenna or cable TV is connected correctly and securely. If you're using an antenna, check the digital channel signal strength. Also, the audio cables you are using may be bad, so try a new set.

Dynex DX-19E310NA15 Specifications

General

Screen Size	19 inches
Display Type	LED
Resolution	1366 x 768
Refresh Rate	60 Hz
HDMI Ports	1
USB Ports	1
Component Video Input	1
Composite Video Input	1
Tuner	ATSC/NTSC
Aspect Ratio	16:9
Power Consumption	25W
Inputs	HDMI, USB, Composite
Sound Output	10W (2 x 5W)