DX-AC501
500mA Universal AC Adapter
This adapter is designed to supply power to most small electric
devices. To ensure proper conguration of the adapter for your
device, follow these instructions carefully.
Package contents
• 500mA universal AC adapter
• Six plug tips for most common electric devices
• Quick Setup Guide
Getting started
1 Determine the voltage required to power your device and
select the same voltage on the adapter. (Examples include
3V and 4.5V) (You may nd the required voltage beside the
device DC jack.)
2 Locate the DC input on the device (sometimes labeled DC in)
and select the plug that best ts the jack.
3 Determine the polarity required to power the device and
insert the plug into the cable receptacle as follows:
If your device shows a positive polarity symbol on the product,
then insert the plug like this:
QUICK SETUP GUIDE
Note the positive (+) symbol on the plug.
Note the word “TIP” is visible.
To Next Page
Need help?
General
