Dynex DX-MNP70BL - User Manual

To Next Page

V1 ENGLISH 14-0368

Important safety instructions

• Make sure that all leg locks are correctly tightened and that

the leg is fully opened before use.

• Do not carry or transport your monopod with camera

equipment attached (for example, over your shoulder or

cradled in your arms).

• Do not expose your monopod to excessive heat or cold, or

use near any ame or re.

• Do not oil or grease any part of the monopod.

• Do not use any solvents or thinners to clean your monopod.

Use only a mild detergent and wipe dry with a soft, lint-free

cloth.

• Do not exceed the load limit of this monopod.

Specications

Folded length: 22.4 in. (57 cm)

Maximum height: 70 in. (177.8 cm)

Minimum height: 22.4 in. (57 cm)

Weight: 0.8 lbs (0.4 kg)

Load capacity: 8.8 lbs (4 kg)

One-year limited warranty

Visit www.dynexproducts.com for details.

Contact Dynex:

For customer service, call 800-305-2204 (U.S. and Canada) or

01-800-926-3020 (Mexico)

www.dynexproducts.com

DYNEX is a registered trademark of BBY Solutions, Inc.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.

QUICK SETUP GUIDE

DX-MNP70BL

70" Lightweight Monopod

Before using your new product, please read

these instructions to prevent any damage.

Need help?

Do you have a question about the Dynex DX-MNP70BL and is the answer not in the manual?

Summary

Important Safety Instructions

General Safety Precautions

Ensure leg locks are tight, avoid carrying with equipment attached, protect from extreme temperatures and liquids.

Warranty and Contact Information

Using Your Monopod

Monopod Operation Steps

Steps for adjusting the foot, opening leg locks, extending legs, closing locks, and attaching the camera securely.

Storing Your Monopod

Monopod Storage Procedure

Instructions for safely storing the monopod, including removing the camera and placing it in the carrying case.

The Dynex DX-MNP70BL is a 70" lightweight monopod designed to provide stable support for cameras. It is a portable and versatile accessory for photographers and videographers, offering a balance of stability and ease of use.

Function Description:

The primary function of the Dynex DX-MNP70BL monopod is to provide a stable platform for cameras, reducing camera shake and allowing for sharper images and smoother videos, especially in low-light conditions or when using longer lenses. Unlike tripods, monopods offer greater mobility and are quicker to set up and adjust, making them ideal for situations where speed and flexibility are crucial, such as sports photography, wildlife photography, or events. The monopod supports the weight of the camera, alleviating strain on the user's arms during extended shooting sessions. Its adjustable height allows users to position their camera at various levels to capture different perspectives. The retractable spike foot provides secure footing on diverse terrains, enhancing stability outdoors.

Important Technical Specifications:

Folded length: 22.4 inches (57 cm) – This compact size makes it easy to transport.
Maximum height: 70 inches (177.8 cm) – Provides ample height for most shooting scenarios.
Minimum height: 22.4 inches (57 cm) – Allows for shooting at lower angles or for compact storage.
Weight: 0.8 lbs (0.4 kg) – Extremely lightweight, contributing to its portability.
Load capacity: 8.8 lbs (4 kg) – Capable of supporting a wide range of DSLR, mirrorless, and video cameras with various lenses.
Mounting screw: 1/4" – A standard size compatible with most cameras.
Leg sections: Multiple sections with quick release leg locks for easy height adjustment.
Foot type: Rubber foot with a retractable spike, offering versatility for different surfaces.

Usage Features:

Adjustable Foot: The monopod features a versatile foot design. For normal use, the rubber foot covers the spike, providing grip on smooth surfaces. For rugged outdoor areas, the rubber foot can be rotated up or removed to expose the spike, allowing it to stick into the ground for enhanced stability.
Quick Release Leg Locks: The monopod is equipped with quick release leg locks that allow for rapid extension and retraction of the leg sections. To adjust the height, users simply flip open the locks, extend the leg sections to the desired height, and then close the locks to secure them.
Optimal Stability: For maximum stability and support, it is recommended to extend the leg sections from the top down, starting with the thickest section.
Camera Attachment: Cameras are attached to the monopod using a standard 1/4" mounting screw located on the camera mounting plate.
Wrist Strap: A wrist strap is included, allowing users to carry the monopod securely and preventing accidental drops.
Grip Sponge: The monopod features a grip sponge for comfortable handling, especially during prolonged use or in cold weather.
Portability: With its lightweight design and compact folded length, the monopod is easy to carry, especially with the included carrying case.

Maintenance Features:

Cleaning: To clean the monopod, use only a mild detergent and wipe it dry with a soft, lint-free cloth. Avoid using solvents or thinners, as these can damage the monopod's materials.
Lubrication: Do not oil or grease any part of the monopod. It is designed to function without external lubrication.
Environmental Care: Avoid exposing the monopod to excessive heat or cold, and keep it away from open flames or fire to prevent damage to its components.
Storage: When not in use, remove the camera, collapse the legs, close the leg locks, and store the monopod in its carrying case to protect it from dust and damage.
Load Limit Adherence: Always adhere to the specified load capacity of 8.8 lbs (4 kg) to prevent damage to the monopod and any attached equipment.
Secure Leg Locks: Ensure all leg locks are correctly tightened and that the leg is fully opened before use. Incorrectly secured leg locks can lead to unexpected retraction, potentially damaging the monopod or the mounted camera.
Safe Transport: Do not carry or transport the monopod with camera equipment attached. This prevents potential damage to both the camera and the monopod from accidental impacts or strain.

The Dynex DX-MNP70BL monopod is a reliable and user-friendly tool for photographers seeking a lightweight, portable, and stable camera support solution. Its robust design and practical features make it suitable for a wide range of photographic applications.