DYNABRADE, INC. www.dynabrade.com
8989 Sheridan Drive
•
Clarence, NY 14031-1419
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
© DYNABRADE, INC., 2017
OPTIONAL ACCESSORIES
RAPTOR VAC
®
VACUUM SYSTEMS
MACHINE SPECIFICATIONS
LIFETIME WARRANTY
To validate Dynabrade Lifetime Warranty, you must register each tool at: www.dynabrade.com. Registration of each tool at website is required.
Dynabrade will not honor Lifetime Warranty on unregistered tools. Please view the entire Lifetime Warranty Policy at www.dynabrade.com.
Additional Specifications: Air Inlet Thread 1/4" NPT • Hose I.D. 1/4" (6 mm) • Pad Thread 5/16"-24 Female
Model Pad Type Pad Dia. Vacuum Power Air Consumption Weight Length Height
X51 Vinyl-Face
5"
(127 mm)
Non-Vacuum
.3 hp
(224 W)
19 SCFM
(538 LPM)
1.78 lb. (0.8 kg) 6.9" (176 mm)
3.7"
(95 mm)
X51H
Hook-Face
X51V Central Vacuum 1.94 lb. (0.9 kg) 9.1" (230 mm)
X52 Vinyl-Face
Non-Vacuum 1.74 lb. (0.8 kg) 6.9" (175 mm)
X52H
Hook-Face
X52V Central Vacuum 1.90 lb. (0.9 kg) 9.1" (230 mm)
X61 Vinyl-Face
6"
(152 mm)
Non-Vacuum 1.86 lb. (0.8 kg) 7.4" (188 mm)
X61H
Hook-Face
X61V Central Vacuum 2.02 lb. (0.9 kg) 9.5" (242 mm)
X62 Vinyl-Face
Non-Vacuum 1.82 lb. (0.8 kg) 7.4" (188 mm)
X62H
Hook-Face
X62V Central Vacuum 1.98 lb. (0.9 kg) 9.5" (242 mm)
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
Part No. 95842: 1pt. (473 ml)
Part No. 95843: 1 gal. (3.8 L)
Whip Hose
•
1" diameter conductive vacuum hose with
Swivel Cuff 31916 for attachment to our
Raptor Vac
®
standard 1-1/4" hose
•
5/16" diameter air line with (2)1/4" NPT
male fittings, 1/4" female Mega Flow Plug
and is protected by a braided hose sleeve.
Part No. 31917: 2 meter
Dynorbital
®
Extreme, is compatible with Dynabrade
Raptor Vac
®
systems using 31917 Whip Hose or
standard Dynabrade Raptor Vac
®
hose assemblies.
REFERENCE CONTACT INFORMATION
Visit dynabrade.com for your model’s current vibration and sound data.
American National Standards Institute (ANSI)
25 West 43 Rd St., 14th Floor • New York, NY 10036 • Tel: 1 (202) 293-8020
Compressed Air & Gas Institute
1300 Sumner Ave. • Cleveland, OH 44115-2851
Tel: 1 (216) 241-7333 • Fax. (216) 241-0105
European Committee for Standardization
Rue de Stassart 36 • B - 1050 Brussels, Belgium
International Organization of Standards
Case postale 56 • CH-1211 Geneva 20
Tel: + 41 22 749 01 11 • Fax: + 41 22 749 09 47
Government Printing Office
Superintendent of Documents • Attn: New Orders
P.O. Box 371954 • Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Tune-Up Kit
•
Contains high and
medium wear parts.
Part No. 96576
Drop-In Motor Assemblies
Orbit Dia. 5" Dia. Models 6" Dia. Models
3/16" 69480 69482
3/32" 69481 69483
To Previous Page
Loading...