Dyon SMART 42 XT - User Manual

To Next Page

V1.1.0

DYON SMART 42 XT – Quick Start Guide

1. Mounting

Please pay attention to the instructions of the stand mounting

provided in the manual.

2. Switch ON

Step 1: Connect the TV with the power supply.

Step 2: Please establish the connection for the antenna to the

desired mode of reception.

The antenna connection for Satellite, DVB-C and DVB-T you

will find on the backside, face to the left if viewed from the

front.

Note on DVB-T

Whether and how many transmitters can be received depends on the location of

the device and the availability of DVB-T transmitters in this region. DVB-T radio

stations are only available in very few regions.

Please note that when using DVB-T, a new station search should be performed

every time you change location.

Broadcast stations and their transmission frequency vary from region to region.

Note on DVB-C Reception

Via DVB-C the programs can be received analogue or digital. If possible you

should prefer the digital reception mode. In this mode there are available more

channels with a better picture quality.

Encrypted Channels

Via satellite, DVB-T or DVB-C you can receive also encrypted TV channels.

Therefore, you need a CAM Module and a Smart card of your service provider.

Which programs are usable depends on the contract.

Step 3: If desired you can insert a CAM Module and a Smart card

of your service provider into the CI+ Slot.

Note

Module and Smart card are not included in the delivery.

The activation of the card can take a few minutes when it will be used for the first

time. The device controls the module after every switching on. Please pay

attention to the manual of CI+ Module and Smart card.

Just CI+ Modules and Cards are usable. Other models are not supported.

Note on CI+

Please pay attention that function can be limited on some channels.

The program provider limits this. The manufacturer is not responsible for this.

3. Switch ON

Step 1: Insert the batteries making sure the polarity into the remote

control.

Step 2: To switch on press the red “power button” on the top left on

your remote control.

Step 3: The device will start and the initial setup will be shown.

4. Setup

Step 1: Press the OK button to start the initial setup. Use the

/ buttons to select the desired language of the menu

and press the  button to move to the next option.

Step 2: Confirm the data processing information by marking

“agree” and press the OK button and then the  button to

continue.

Step 3: Please choose your appropriate country setting.

Step 4: Please choose your time zone.

Step 5: "Home" mode for adjusting the illumination level is

recommended for private use.

Step 6: Now make the network settings by first selecting the

connection type and, in case of WLAN, marking your

network with the OK button and entering the connection

data. Now enter the password and confirm with press the

OK button and the  button to move to the next option.

Step 7: In the next step you can set up Netflix, if you have a user

account.

Attention

If you set up Netflix here, there will be no channel search. Skip the set up of Netflix

first to set up the TV reception.

Step 8: If you have set up Netflix, exit Netflix to DVB-T/-C mode. No

channel search has been performed, now switch to the

desired reception mode first and then do a channel search

via the menu.

Step 9: If you skipped the Netflix set up, you can now choose the

reception type.

Step 10: For satellite, you also can use a predefined channel list for

ASTRA 19.2° satellite.

Step 11: Then wait until the channel scan is finished and the first

channel is displayed.

Important Remote Control Keys

Note

For detailed Information about operating and about the device please read the

enclosed manual carefully.

If you have any further questions please refer to our customer service

support@axdia.de

In order to handle your issue quickly we kindly ask you to provide us with the

following information:

- Name of DYON - Product

- Serial number and date of purchase

- Description of problem

Mute Sound (Mute)

Prime video direct dial

Select signal source (e.g.

HDMI, composite) (Source)

Settings menu

Arrow keys for navigation

Exit the menu

Next channel/

Previous channel

Program Guide (EPG)

Teletext (TEXT)

ON / OFF (Power)

Numeric keys for direct

program selection

Reception mode

(LIST)

YouTube direct dial

Netflix direct dial

Smart functions

Confirm entries (OK)

Step back (Back)

Adjust volume

(VOL +/-)

Playback control

(USB)

Need help?

Do you have a question about the Dyon SMART 42 XT and is the answer not in the manual?

Summary

Connecting and Switching On the TV

TV Setup Process

Remote Control Key Functions

Overview of essential remote control buttons for TV operation, including navigation, volume, and direct access keys.

Important Safety Instructions

General Safety Precautions

Guidelines for safe usage, cleaning, ventilation, heat sources, power cord, and servicing to prevent hazards.

Environmental Protection and Disposal

Instructions on proper disposal of the product and batteries, emphasizing recycling and environmental responsibility.

The DYON SMART 42 XT is a television designed for versatile reception and smart functionalities. It supports multiple reception modes, including Satellite, DVB-C, and DVB-T, allowing users to access a wide range of channels. The device features a 42-inch screen, though the exact dimensions are not specified, and is designed for home use with a recommended "Home" mode for illumination adjustment.

Function Description:

The TV's primary function is to display television content from various sources. It integrates a digital tuner capable of receiving DVB-T, DVB-C, and Satellite signals. For DVB-T reception, the number of receivable transmitters depends on the device's location and regional availability, with radio stations being available in very few regions. Users are advised to perform a new station search every time they change location when using DVB-T. DVB-C reception supports both analogue and digital programs, with digital mode being recommended for better picture quality and more channels. For encrypted channels received via satellite, DVB-T, or DVB-C, the TV requires a CAM Module and a Smart card from the service provider, which are not included in the delivery. These cards and modules can be inserted into the CI+ Slot. The device controls the module after every switch-on, and activation of the card may take a few minutes upon first use. Only CI+ Modules and Cards are supported.

Beyond basic TV reception, the DYON SMART 42 XT offers smart TV capabilities. It allows for network settings, supporting both wired and wireless (WLAN) connections. Users can configure Netflix directly during the initial setup, though skipping this step is recommended if a channel search is desired first. If Netflix is set up initially, users must exit Netflix to DVB-T/-C mode and perform a channel search via the menu. The TV also provides direct access buttons on the remote control for popular streaming services like YouTube and Netflix, as well as for Prime Video.

Important Technical Specifications:

Reception Modes: Satellite, DVB-C, DVB-T.
Connectivity: WLAN (Wi-Fi), Ethernet (wired network connection), HDMI, Composite.
CI+ Slot: For CAM Modules and Smart cards to decrypt encrypted channels.
Wi-Fi Transmission Power:
- 2412-2472 MHz (802.11b/g): Output power 17.8 dBm.
- 2412-2472 MHz (802.11n(HT20)): Output power 17.8 dBm.
- 2412-2472 MHz (802.11n(HT40)): Output power 17.8 dBm.
Power Supply: Connects to a standard power outlet.
Remote Control: Infrared, requires batteries (polarity must be observed).
Energy Efficiency: Information available via a QR code linking to the EU Regulation (EU) 2019/2013 website.

Usage Features:

Initial Setup: Guided process including language selection, data processing confirmation, country and time zone settings, and network configuration.
Illumination Level: "Home" mode recommended for private use.
Channel Search: Essential for DVB-T/-C and Satellite reception, especially after initial setup or location changes. For satellite, a predefined channel list for ASTRA 19.2° satellite is available.
Remote Control Functions:
- Power (ON/OFF): Red button on the top left.
- Numeric Keys: For direct program selection.
- LIST: Reception mode selection.
- ASPECT: Not explicitly defined, but typically for aspect ratio adjustment.
- SOURCE: Selects signal source (e.g., HDMI, composite).
- NETFLIX, YouTube, Prime Video: Direct dial buttons for streaming services.
- Settings Menu: For smart functions and TV configurations.
- OK: Confirms entries.
- Arrow Keys: For navigation.
- EXIT: Exits the menu.
- CH +/-: Next/Previous channel.
- VOL +/-: Adjusts volume.
- INFO: Displays information.
- EPG: Program Guide.
- AUDIO: Audio settings.
- SUBTITLE: Subtitle settings.
- TEXT: Teletext.
- SLEEP: Sleep timer.
- Playback Control (USB): Buttons for media playback (e.g., play, pause, stop, fast forward, rewind).
USB Playback: The remote control includes buttons for playback control, indicating support for media playback from USB devices.
User Manual: Detailed information about operating the device is available in the enclosed manual.

Maintenance Features:

Cleaning: Only clean with a dry cloth.
Ventilation: Do not block any ventilation openings; install according to instructions.
Power Cord: Protect the power cord from being walked on or pinched.
Servicing: Refer all servicing to qualified service personnel if the apparatus is damaged in any way (e.g., damaged power cord/plug, liquid spills, objects falling into the apparatus, exposure to rain/moisture, abnormal operation, or drops).
Disconnect Device: The mains plug serves as the disconnect device and must remain readily operable.
Battery Disposal: Batteries should not be disposed of with normal household waste. They must be taken to local retail or community collection points for recycling.
Product Recycling: At the end of its operating life, the product should not be disposed of with normal household waste. It must be delivered to a collection point for recycling electrical and electronic equipment. The materials used are recyclable.