EasyManua.ls Logo

dyras D-2000D - Product Specifications; Appliance Placement

dyras D-2000D
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATION
Power
65W
Cooling element
Thermo-electric Peltier module
Timer
24 hour settings
Best Working Environment
25, over 85% Relative Humidity.
Cable lenght
1,25m
Display
LED screen
Use/control
With remote control
PLACE THE APPLIANCE
Place on a flat, stable surface with at least 15-20cm distance between the unit and
any large object. Avoid the following locations:
-Where it is exposed to direct sunlight
-Where it is close to heat radiating sources
-Where it is dusty
Any moisture in the air that is drawn into the dehumidifier will form as water droplets
and this will eventually collect in the water tank. The rate which water is collected in
the tank is dependent on a number of factors such as room temperature, the source
of the humidity, etd. It is a known fact that at low room temperature, the extraction
rate is also low.The higher the humidity, the better the result.
When the dehumidifier start working , the temperature and humidity will be showed
on display, it is the environment temperature and humidity. When the dehumidifier
working for a long time, the dehumidifier will absorb the humidity near the
dehumidifier first, and the dehumidifier’s vent will exhaust the hot air, so the
temperature and humidity on the display will be different with other place or other
temperature/humidity equipment, this is normal, it doesn’t mean there is a faulty.

Related product manuals