11
Before first use
For a perfect taste, carry out 2 or 3 boil-processes with fresh water (without coffee). Once all the
water has passed through, switch off the appliance and let it cool down during 5 minutes. Then
repeat the process with fresh water.
Making coffee
h, cold water
only. The number of cups can be read on the water tank.
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance
before making coffee, including the funnel, filter and cup, so that the coffee flavour cannot
be influenced by the cold parts.
Put the mesh into metal funnel, pull the press bar backward, make sure the tube on the
funnel aligns with groove in the appliance, then insert the funnel into the appliance from the
d you can fix them into coffee maker firmly
Place an espresso cup (yourself cup) on removable shelf.
Then connecting the appliance to power supply source. Make sure the steam control knob is
begins to be heated.
Making more coffee straight away?
the coffee maker and allow at least 5 minutes for it to cool down. Then you can refill the water tank.
Cappucino
First, make an espresso.
Note: During operation, if the blue indicator is extinguished, you should turn the steam
control knob to anti-clockwise direction.
Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you are
recommended to use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and
bear in mind that the milk increases in volume by 2 times, make sure the height of jug is
enough.
Turn the steam control knob slowly in anti-clockwise, steam will come out from the frothing
device.
Note: Never turn the steam control button rapidly, as the steam will accumulate rapidly in
short time which may increase the potential of the risk of explosion.
To Next Page
Loading...
