DWA-3000B-DO ANALYZER
2
Table of Content
1. Introduction--------------------------------------------------------------------------------------------------------------------------------------- 3
2. Summarized Outline------------------------------------------------------------------------------------------------------------------------------ 3
3. Warning and Caution ---------------------------------------------------------------------------------------------------------------------------- 3
1) Warning
2) Caution
4. Process Applications------------------------------------------------------------------------------------------------------------------------------- 4
5. Special Features----------------------------------------------------------------------------------------------------------------------------------- 5
6. Specification -------------------------------------------------------------------------------------------------------------------------------------- 5
7. Function Key Description------------------------------------------------------------------------------------------------------------------------- 6
8. CONFIGURE MODE Function Set-Up Detail----------------------------------------------------------------------------------------------------- 6
9. Calibration ----------------------------------------------------------------------------------------------------------------------------------------- 6
1) CALIBRATION MODE Features
2) Calibration Provision
3) ZERO Calibration
4) SPAN Calibration
10. DO Measurement-------------------------------------------------------------------------------------------------------------------------------- 9.
11. CONFIGURE MODE (Set-Up Change) --------------------------------------------------------------------------------------------------------- 10 .
1) Sensor parameter
2) Sensor setting
3) Temperature Parameter
4) External Contact Output Set-Up
5) Analogue Output Set-Up
6) Cleaning Contact Output Set-Up
7) Trend Set-Up
8) Time Set-Up
12. Other Function Set-Up ------------------------------------------------------------------------------------------------------------------------ 18
1) Manual Cleaning
2) Clearing of Trend Screen
13. Installation------------------------------------------------------------------------------------------------------------------------------------ 19
14. Wiring----------------------------------------------------------------------------------------------------------------------------------------- 20
15. Outward Appearance------------------------------------------------------------------------------------------------------------------------ 22
16. Cause of Trouble and Troubleshooting---------------------------------------------------------------------------------------------------- 23
17. Repair of Defective Electrode--------------------------------------------------------------------------------------------------------------- 24
1) Maintenance of Electrode and Caution
2) Replacement of Electrode
18. References ----------------------------------------------------------------------------------------------------------------------------------- 24
1) Polarography
2) Galvanic Cell
3) Saturated DO by Temperature (JIS)
4) Saturated DO by Temperature and Salinity (JIS)
5) Saturated DO by Temperature (ANSI)
19. Integrated Communication Protocol Standard (TMS Output) ----------------------------------------------------------------------- 30
1) Summary
2) Communication Protocol Standard
3) Communication Command Code
4) Communication Command Description
20. Quality Assurance and Post Order Services-------------------------------------------------------------------------------------------------- 33
1) Quality Assurance
2) Post Order Service Request and Consultation
To Next Page
Loading...