DYS DWA-3000B-DO - DO Measurement

DWA-3000B-DO ANALYZER
9
D O 25 .0℃
정상 측정중
8.11
mg/L
측정항목
측정값
측정 그래프
상태정보
온도
측정단위
10. DO Measurement
주 의
▪ Be sure to calibrate prior to the installation of instrument.
▪ To be displayed on LCD screen in real time once the initial power is supplied.
▪ Measuring item, temperature, measuring value, measuring unit, measuring graph & status
information are displayed.
NORMAL MEASURING OPERATION
※ CONTENT OF STATUS INFORMATION
Message Description
Normal Measuring
Operation
Operate under the condition not exceeding the Upper/Lower Limit set up
values.
Upper Limit Contact
Output
Contact activated exceeding beyond the Upper Limit set up value.
Lower Limit Contact
Output
Contact activated exceeding beyond the Lower Limit set up value.
Cleaning
Holding continuous measuring for short time under Automatic Cleaning
Operation
Calibrating
Message displayed under Calibration Mode momentarily when moving from
Calibration Mode to Measurement Mode.
Beyond Measuring Range
Message displayed when exceeding the maximum & minimum measuring
ranges.
Unit
Temp .
Graph
Status
Measurement Value
Measurement Item