Dyson AB10 - Installation Overview - Getting Started; Included Components; Required Tools and Supplies

Dyson Airblade Tap hand dryer
AB09 AB10 installation overview.
AB11 installation overview.
Installation overview
Assemble
1 2
Short
Long
What’s in the box
Additional items you will need for installation
Torx T15 screw driver – long handle
37 mm Box spanner
Mains power supply
Water temperature control: Thermostatic mixer or heater
Water pressure control if pressure is not between 1 and 8 bar
Visit website for full downloadable installation guide.
www.dyson.com.au/docs