Dyson Airblade Series User Manual

1
GB/IE
READ AND SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
BEFORE INSTALLING OR USING THIS APPLIANCE, READ
ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THE
INSTALLATION INSTRUCTIONS AND MAINTENANCE MANUAL.
When using an electrical appliance, basic precautions should
always be followed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
1. This Dyson appliance can be used by children aged from
8 years and above and persons with reduced physical, sensory
or reasoning capabilities, or lack of experience and knowledge,
only if they have been given supervision or instruction by a
responsible person concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
2. Before servicing or cleaning the appliance, switch the power
off at the service panel. Ensure the switch is locked to prevent
the power from being switched on accidentally. If the means
of switching off the power cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3. Do not use sealant when fixing the appliance to the wall.
4. Do not install directly above a heating appliance.
5. The maximum altitude of use is 2,300 metres.
6. The size of the lead wire used for the wiring connection
(including grounding lead) shall not be smaller than 18AWG.
DO NOT USE ANY JETWASH EQUIPMENT FOR CLEANING ON
OR NEAR THIS APPLIANCE.
WARNING
ALL ELECTRICAL INSTALLATION AND REPAIR WORK SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN OR DYSON FIELD
SERVICE ENGINEER IN ACCORDANCE WITH CURRENT LOCAL
CODES OR REGULATIONS.
CAUTION
The appliance should be located indoors. Operating temperature
range 0°C (32°F) to 40°C (104°F). To reduce the risk of fire or
electric shock, do not expose the internal mechanisms/components
of this appliance to moisture.
Installation instructions

Dyson Airblade Series Specifications

General

Brand	Dyson
Model	Airblade Series
Category	Dryer
Language	English

Summary

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

Key safety guidelines before installation and use.

Pre-installation Checks

Pre-installation Planning

Guidance on site selection and preparation before installation.

Wall Fixing Requirements

Guidelines for secure wall mounting and material compatibility.

Power Modes

Details on selecting between 900W and 650W power settings.

Electrical

Information on power supply, cable specs, and local regulations.

Installing the Dyson Airblade™ Hand Dryer

Drill the mounting holes

Instructions for drilling mounting holes on the wall.

For rear cable entry installation

Steps for connecting the power cable via rear entry.

For side cable entry installation

Steps for connecting the power cable via side entry.

Install the main body

Instructions for attaching the main unit to the backplate.

Complete the installation

Final steps including filter placement and power testing.

Looking After Your Hand Dryer

Register Your Dyson Hand Dryer

Guide to registering the machine for warranty and support.

How to Use

Instructions on operating the hand dryer for optimal drying.

Troubleshooting

Common issues and solutions for hand dryer operation.

Filter Maintenance

Guidance on checking and maintaining the air filter.

Additional Information

Disposal Information

Guidelines for environmentally responsible disposal of the product.

Your Guarantee

Terms and conditions of the 5-year Dyson guarantee.

Warranty Coverage and Exclusions

Details on warranty coverage, exclusions, and limitations.

Data Protection

Information on data handling during machine registration.