The Dyson Airblade V hand dryer should be cleaned daily.
Follow these 3 simple steps to ensure the machine performs
to its best and remains hygienic. Using the wrong cleaning
method or product may invalidate the warranty.
Keep it clean
General advice
Do not pressure wash the machine.
All cleaning chemicals should be used
exactly as indicated by the manufacturer’s
instructions (including appropriate dilution).
If a cleaning product is left on the machine for
too long, a film will form. This may reduce the
effectiveness of the antimicrobial additives.
Any chemicals intended for use should first be
tested on an inconspicuous area to confirm
suitability. Aside from cleaning chemicals, care
should be taken to prevent any harmful fluids
from coming into contact with the product, in
particular oils and alcohol-based products.
Chemical guidelines
Most professional cleaning chemicals can
be used. The following are some that are
harmful to the machine.
Filter change kit
Designed for machines with high usage,
the kit provides everything needed to
change the machine’s HEPA filter on site.
Contact us for more information:
888-397-6622
airbladeinfo@dyson.com
www.dysonairblade.com
Wipe all surfaces with a
soft cloth and non-abrasive
cleaner, including the air
inlets on the side of the
machine.
Clean the wall underneath
the machine. This may be
required more regularly
in high use areas.
Clean the floor beneath
and around the machine.
1 2 3
3393156 01.30.14 ©2014 DYSON
Alcohol-acid mixes
Alcohol
Solvent /oil-based
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
DO NOT USE:
To Next Page
Loading...
