Dyson airstrait - Deep cleaning the filter

Deep cleaning the filter
Remove filter unit
Unplug your straightener and let it cool down before cleaning your filter.
Hold the body of your straightener with one hand and the perforated filter
unit with the other. Pull down on the filter unit to release it from the machine
and onto the cable.
Gently pull the filter open and slide it off the cable.
Wipe filter mesh
Wipe the filter mesh with a dry, lint-free cloth to remove any debris.
Soak filter unit
Leave the filter unit to soak in warm, soapy water for at least 30 minutes.
We recommend using a clarifying shampoo or dish soap.
Remove inner filter
Remove from the filter cage.
If the filter becomes blocked, you can deep clean it.
For more,
go to
dyson.com
Filter
blocked
Show me
To clean: Remove Refit100% dry
24h
WashSoak
Repeat
For more,
go to
dyson.com
Filter
blocked
Show me
To clean: Remove Refit100% dry
24h
WashSoak
Repeat