Dyson airstrait - Cleaning your machine; Cleaning the filter

Cleaning your machine
Cleaning the filter
Your straightener has been precisely engineered. To maintain outstanding
styling performance, it needs to be kept free from hair product residue and
debris. A little regular maintenance will optimize performance.
Remove the filter
Unplug your straightener and let it cool down before cleaning your filter.
Hold the body of your straightener with one hand and the perforated filter
unit with the other. Pull down on the filter unit to release it from the machine
and onto the cable.
Gently pull the filter open and slide it off the cable.
Wash the filter
Leave the filter unit to soak in warm, soapy water for at least 30 minutes.
We recommend using a clarifying shampoo or dish soap.
Using your fingertips, rub gently to thoroughly clean both the inside and
outside surfaces of the filter.
Shake off excess water and leave for 24 hours in a well-ventilated place until
completely dry.
Replace the filter
Pull the filter open and slide it onto the cable.
Slide the filter unit towards the machine body, align and click into place.
Your straightener will alert you if the filter isn’t in place correctly.
For more,
go to
dyson.com
Filter
blocked
Show me
To clean: Remove Refit100% dry
24h
WashSoak
Repeat
For more,
go to
dyson.com
Filter
blocked
Show me
To clean: Remove Refit100% dry
24h
WashSoak
Repeat
For more,
go to
dyson.com
Filter
blocked
Show me
To clean: Remove Refit100% dry
24h
WashSoak
Repeat