Cleaning the clear bin
TM
7
• Do not use detergents,
polishes or freshening
products.
• Do not immerse the cleaner
in water.
• Ensure the bin is completely dry
before refitting.
Cleaning the shroud (optional)
Ensure bin is empty and bin base is
open. Press catch A to release the
clear bin from the cyclone.
Clean shroud with a cloth or dry
brush to remove fluff.
Cleaning the clear bin
TM
(optional)
• Ensure bin is empty and bin base
is open.
• Rinse with cold water only.
• Ensure bin is dry before replacing.
Re-assembling the clear bin
TM
A Holding carry handle, fit cyclone
assembly inside the bin.
B Line up the front and rear guides
and push down to secure.
Important information
A
A
B
To Next Page
Loading...
