CAUTION
• Turn power off and unplug
before checking for
blockages. Failure to do
so could result in electric
shock or personal injury.
• If any part of your
machine becomes
blocked, it may overheat
and then automatically
shut off. Unplug machine
and leave to cool down.
• For safety, please lie the
machine on its side before
checking for blockages.
• Please note: clearing
blockages is not covered
by your machine’s limited
warranty.
• Beware of sharp objects
when clearing blockages.
• Refit all parts of the
machine securely before
using it.
Check to see if tools, wand and hose are clear
of blockages.
A To remove the hose, rotate base of hose
downwards until it clicks, then twist away
from the machine.
B Squeeze release catches to remove the airway
inspections and check inside.
C Pull the top end of the tube away from machine
and check inside.
D Undo colored soleplate
fasteners with a coin.
E Rotate endcaps and remove.
F Pull out brushbar sections.
G Cut out debris blocking
bristles.
8 Clearing blockages
A
E
G
F
B
C
D
To Next Page
Loading...
Need help?
General
