Dyson Digital Slim - Cleaning Your Tools; General Tool Care Instructions

Cleaning your tools
Don’t put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Wipe with a damp, lint-free cloth, without touching the connector end.
Make sure your tools are completely dry before using.
Combination tool
Crevice tool Extension hose Light pipe crevice tool Low-reach adaptor Soft dusting brush
Stubborn dirt brush Up-top adapter Mattress tool
A long tool with
an angled end.
This tool has
acombination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
A flexible hose
engineered from
tough wire and
durable plastic.
A long tool with
an angled end
and electrical
connector end
that powers
LED lights when
connected to the
machine.
A jointed
connector that
creates a flexible
joint between
the machine and
the tool. It must be
used in conjunction
with a tool or
cleaner head.
Pliable bristles
and felt bumper
strip on a narrow,
tapered tool.
Stiff bristles on
awide head.
A flexible joint
between the
machine and the
tool. It must be
used in conjunction
with a tool or
cleaner head.
A wide mouth tool
with a lint edge.