Dyson HP03 User Manual

10
6 sec
1
3 4 5
6 7 8
2
click click
9 10 11
12
click click
When your non-washable filter unit needs replacing the appliance will display the pattern shown. To replace the non-washable filter
unit, follow these steps. If the appliance has been in use, leave for 1 to 2 hours before replacing the filter unit to allow the appliance to
cool down completely. Your Dyson appliance is programmed to remind you to replace the filter unit after 12 months based on 12 hours
usage a day. Please note your indicator will activate sooner with more use. The indicator is only a guide. Use in heavily polluted
environments may require the filter unit to be replaced more regularly. Outside air quality can be checked through the Dyson Link app.
Replacing the filter unit
When disposing of the
exhausted filter unit please do
so in accordance with local
regulations.
21.02.2017 15:52 - C84661_HP03_OPMAN_ANZ_ X455_84661.indd_15_4c0s

Dyson HP03 Specifications

General

Air Multiplier Technology	Yes
HEPA Filter	Yes
Remote Control	Yes
Wi-Fi Connectivity	Yes
Cord length	1.8 m
Activated Carbon Filter	Yes
Fan Speeds	10
Night Mode	Yes
Auto Mode	Yes
Oscillation	Yes
Height	61.5 cm
Timer	Yes
Diameter	222 mm (base)