6
Remote control
Airflow
Tilt function
Display icons
To operate, point the
remote control toward
the front of the base.
Attach the remote control to the
top of the machine with the buttons
facing down.
Select a high flow of air.
Flashing green = Wi-Fi
is ready to connect to
your Dyson Link app
Flashing white =
Wi-Fi connecting
Solid white = Wi-Fi
connected
Off = Wi-Fi disabled
Solid white = cleaning/
air quality target has not
been met
Solid green = clean/air
quality target has been met
Off = machine is not in
auto cleaning mode
Off = machine is not in
night mode
Solid white = machine is
in night mode
Select a low flow of air.
Airflow control
Standby
ON/OFF
Auto mode
Oscillation
ON/OFF
Night mode
Sleep timer
Carefully hold the base
and the main body. Tilt
the amplifier forward or
backward for the required
airflow angle.
Sleep timer
To set the sleep timer, select the desired
time. When time reaches zero, the
machine will go into standby mode.
To cancel, decrease the time until two
dashes appear.
To Next Page
Loading...
Need help?
General
