9
When your non-washable filter unit needs replacing
the machine will display the pattern shown. To
replace the non-washable filter unit, follow these
steps. Ensure your machine is unplugged. Your
Dyson machine is programmed to remind you to
replace the filter unit after 12 months based on
12 hours usage a day. Please note your indicator will
activate sooner with more use. The indicator is only
a guide. Use in heavily polluted environments may
require the filter unit to be replaced more regularly.
Outside air quality can be checked through the
Dyson Link app.
A clockwise-rotating loading pattern
will be shown on the LED display.
Once the loading pattern is complete, the
machine will return to its normal usage.
When you have re-assembled your machine, press and hold the
‘Standby ON/OFF’ button for 6 seconds on the remote control to
reset the filter indicator.
Replacing the filter unit
When disposing of the exhausted filter unit please
do so in accordance with local regulations.
To Next Page
Loading...
Need help?
General
