Dyson pure cool link tower - Clearing Blockages; Identifying and Removing Blockages; Cleaning the Appliance; Cleaning Procedures and Precautions

8
Clean the hatch every time the filter is
replaced. Open the small hatch on the side
of the appliance. Use a cotton swab to clean
inside and remove any debris. This maintains
sensor accuracy and ensures the continuing
high performance of the appliance.
Look for blockages in the small aperture inside the loop amplifier.
Use a soft brush to remove debris.
Ensure the appliance is unplugged. Dust may
accumulate on the surface of the machine.
Wipe dust from the loop amplifier, filter unit
and other parts with a dry or damp cloth
when dust accumulates.
Press buttons to lift off loop amplifier and lift off filter.
Ensure the appliance is unplugged. Look for blockages in the
air inlet holes on the filter. Use a soft brush to remove debris.
Look for blockages in the air inlet holes under the filter
and use a soft brush to remove debris. Replace the filter
and then the loop amplifier.
Do not use detergents or polishes
to clean the appliance.
Clearing blockages
Cleaning